Cable Railing Post Square Surface Mount Cable Railing Square Surface Mount Post is a piece of our Press And Latch Cable Railing Family. This item comes with one Square predrilled post, mounting flange, base cover and cable fittings. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Material: ANSI 316 Stainless SteelProfile Size: 1.57x1.57" or 40x40mmPost Thickness:Gauge 10 or 0.14" or 3.6mm for End and Corner PostsGauge 12 or 0.102" or 2.6mm for Middle PostsFinish: ASTM A480 No 4 linearly textured Satin FinishHeavy Duty ConstructionEasy to Install and Sturdy Upon CompletionPerfect for Wet or Dry, Indoor or OutdoorMeets ADA, Residential and Commercial Code RequirementsSuitable for Balconies, Decks, Porches, and Stairs (1) Post Pre drilled and tapped (M8 x 1.25mm)(1) Pyramid Handrail Bracket(1) Square Base Cover(1) Square Pivot Flange at the bottom with Angle Post OnlyTensioners/Terminals:(10) Tensioners with 36" Tensioner Post(12) Tensioners with 42" Tensioner Post(10) Terminals with 36" Terminal Post(12) Terminals with 42" Terminal Post(10) Tensioners and (10) Terminals with 36" Corner Post(12) Tensioners and (12) Terminals with 42" Corner Post(10) Tensioners and (10) Terminals with 36" Mid Ext Post(12) Tensioners and (12) Terminals with 42" Mid Ext Post(8) Tensioners with 36" Stair Lower Post(8) Terminals with 36" Stair Upper Post(8) Terminals and (10) Tensioners with 36" Stair Upper Left Post(8) Terminals and (10) Tensioners with 36" Stair Upper Right Post(8) Terminals and (10) Tensioners with 36" Stair Upper Straight(7) Tensioners with 36" Angle Lower Post(7) Terminals with 36" Angle Upper Post Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.